• To determine your firmware version, select Factory | About | Display from the console.


  1. Download the latest bin file (below) to your your computer. Make a note of where you saved this file.
  2. Copy the user.bin to your MicroSD Card (the SD card must be empty).
  3. Power down your display console by removing AC power.
  4. Insert the SD Card into the display console.
  5. Power up the display console.
  6. The console will verify the firmware was updated.
  7. Power down the console after complete. Remove the SD Card when the console is powered down.

Where to purchase a MicroSD Card:

You can purchase one at Amazon, here (4, 8, 16 or 32 GB will work):

Kingston 4 GB microSDHC Class 4 Flash Memory Card SDC4/4GB

Firmware Update Downloads And History:

June 10 2019 | Version 1.4.8


  • Minor bug fixes.

June 6 2019 | Version 1.4.6


  • Fixed issue with back light button not responding.
  • Fixed issue with 16 second updates introduced in Version 1.4.5.

June 6 2019 | Version 1.4.5


  • Improvements to RF Chip Sensitivity
  • More intuitive WiFi and User Interface Set up
  • Improvements to Keyboard User Interface
  • UART0 communication bug fix
  • Improvements to data stream
  • Fixed false Low battery alert PM2.5 sensor
  • RAM optimized

Rain calculation algorithm optimized Backlight on/off control algorithm improved

May 16 2019 | Version 1.4.4


Finalized firmware for PM2.5 Sensor.

April 29 2019 | Version 1.4.2


  • Memory stack optimized.

Checksum prevents corrupted updates.

April 15 2019 | Version 1.4.1


Fixed history time format exported to SD Card.

March 28 2019 | Version 1.4.0


  • Fixes time bug between 12:00am and 1:00am
  • Sensor signal quality and battery status are now displayed
  • Rain rate value is now displayed
  • Sensor ID is displayed on About Display page for advanced customer troubleshooting

History file saved on SD card are now optimized based on units of measure

January 24 2019 | Version 1.3.8


  • Optimized RF receiver response.
  • Corrected several bugs, including barometer scaling error.
  • update rate changed from 30 to 16 seconds.
  • Correct spelling error on upgrade page.
  • Changed time/date format per customer suggestions.
  • Integration of Ambient Weather PM2.5 Particulate Monitor sensor.

Optimized SD Card Storage.

January 16 2019 | Version 1.3.7


  • Optimized RF receiver setting and can follow sensor reception quickly.
  • Background is now black instead of dark gray.

Removed top gray bar to make extra room for date and time.

January 6 2019 | Version 1.3.5


  • Fixes a number of issues with stray characters.
  • Fixes issue with Channel 1 not showing on
  • Fixes issue with date and time.

Screen makes room for new Air Quality Sensor (coming soon, no details yet). Moved date and time to top bar to make room (similar to a phone layout).

December 27 2018 | Version 1.2.7


  • Fixes formatting issue introduced in 1.2.5
  • Fixes issue introduced in 1.2.5 where sunset does not set on home display screen.

December 22 2018 | Version 1.2.6


  • Fixes formatting issue introduced in 1.2.5
  • Fixes bug with barometric pressure calibration for high altitude (above 7,000′).

December 13 2018 | Version 1.2.5


Improved readability of screen. The temperature and wind circles were slightly elongated, and improved resolution of some of the characters.

November 14 2018 | Version 1.2.1


The console could not connect to a non-secure network. This issue was resolved.

September 21 2018 | Version 1.2.0


February was incorrectly spelled “Febuary”.

July 11 2018 | Version 1.1.0


Critical update. Console is bricked when archived data reaches 740th flash block address.

July 3 2018 | Version 1.0.9


Added max daily wind gust to dashboard.

June 30 2018 | Version 1.0.7


  • 10 minute average wind speed was not updating properly.

Return to Help Center >>

Product Manual

Product Page