Ambient Weather Support

It is possible the sensor array was not powered up properly. Please reset the sensor array:

1. Cover the solar collector to shut of the solar energy source.
2. Remove the batteries.
3. Press the reset button for a full minute. There should be no LED flashing
4.  Reinsert fresh batteries. Make sure they are fresh alkaline or lithium Energizer non-rechargeable batteries.
5. Uncover the solar collector.
6. LED should flash once per 14 seconds.
7. Power down and up the console to resync.

If the problem persists, we have a one year warranty. To replace under warranty, please visit:

www.AmbientWeather.com/rma.html

For out of warranty replacement, please visit:

https://www.ambientweather.com/amws2902array.html