Welcome. How can we help?

Help Center Search Results


Try searching by "Product ID", or by asking a general question.

What is the difference between absolute and relative pressure?

Absolute pressure¬†is the measured atmospheric pressure. Absolute pressure is not corrected to sea-level conditions. To compare pressure conditions from one location to another, meteorologists correct pressure to sea-level conditions (referred to as relative pressure, or pressure relative to sea-level). Because the air pressure decreases as…

Wind Speed or Wind Gust Appears to Read Low.

This is a very common complaint with weather station owners, regardless of model numbers or manufacturers (from the low cost $100 weather station to $1000+ weather stations). Many of the units returned to us meet their accuracy requirements based on a constant speed fan test….

No Longer Updating AmbientWeather.net beginning September 5, 2018

On September 5, 2018, AmbientWeather.net moved the website to a different hosting service. This may cause updates to cease if the DNS is cached on your device, network (router) or the Internet. One symptom is the dashboard stops updating, but the graphs continue to update….

Wind Direction is Wrong.

If the wind direction is incorrect, it is likely a calibration issue. You must calibrate your wind vane to true north using markers on the wind vane. This procedure is described in your product User Manual. Some other common mistakes. Wind direction appears 180 degrees…

Weather Station Grounding.

Because lightning is so unpredictable, we cannot make important decisions about your individual installation. If you are installing the weather station on your roof or structure, consult a licensed electrician that specializes in lightning for advice. Because weather stations are not hardened against EMP damage…

How do I read indoor conditions on Weather Underground?

Weather Underground only provides indoor data in their iPad application Wunderstation. However, AmbientWeather.net fully supports indoor and multiple channel sensors. Here is a complete list of weather stations that work with AmbientWeather.net: https://www.ambientweather.com/ambientnet.html  

Status LED is Blinking Rapidly.

If the Status/Reset light is flashing rapidly, it has not made a connection to the Internet. Make sure the WeatherBridge is plugged into your router and the router is connected to the Internet. If the problem persists, perform a factory reset: To restore the WeatherBridge…

How do I find my WeatherBridge on my Network?

To find your WeatherBridge on your local area network: Make sure the status/reset LED is solid and not blinking rapidly. This means it has made a connection to the Internet. With a web browser on the same network, go to: http://magicip.meteobridge.com/ Click on the IP…

How do I Remotely Access my WeatherBridge or WeatherBridgePro?

To remotely access your WeatherBridge and WeatherBridgePro, from a computer on your local area network (LAN), open a web browser and type: http://magicip.meteobridge.com Select the System Panel and check the box: Next, click on this URL to view this link. Your web browser will open…

Rain Totals do not match, console, WeatherBridge and Internet.

Make sure the date, time and time zone match on the WeatherBridge and display console. If there are different, then the rain increments will be different. To set the Time Zone and Annual Rain starting month (default is January), click on the System tab. 3….