Welcome. How can we help?

Help Center Search Results

x

Try searching by "Product ID", or by asking a general question.

What is the difference between absolute and relative pressure?

Absolute pressure is the measured atmospheric pressure. Absolute pressure is not corrected to sea-level conditions. To compare pressure conditions from one location to another, meteorologists correct pressure to sea-level conditions (referred to as relative pressure, or pressure relative to sea-level). Because the air pressure decreases as…

Rain Increment Definitions

Your weather station may only display some of the following increments of rain. Please refer to your User Manual for details. Here are how increments of rain are defined: Rain Rate is defined as the rainfall in the last 10 minutes, multiplied by 6  (10 minutes…

WS-1050: Sensor array not communicating to the display console, WS-1050

If the sensor array is no longer communicating with the console: Replace the batteries in the thermo-hygrometer sensor. We recommend Energizer Lithium Ultimate: https://ambientweather.net/help/why-are-lithium-ultimate-batteries-recommended-and-not-alkaline-or-rechargeable-batteries/ The sensor array should be flashing about once per minute.  If the sensor is not flashing, the sensor is no longer…

Cannot Manually Reset Total Rain to 0, WS-1075 Series.

While in the Normal mode, press the SET key to enter the Quick Set Mode. Press the SET key again two more times to display the Rain Increments of Measure.  Press the + button to change the increments of measure to total rain (the rain…

Temperature Reads too low at night.

Temperature can read too low (or inaccurate) at night when placed close to a radiant heat source, like a house, building or structure.  It can also read lower then other stations in your area due to irrigation or sprinklers. Place the sensor inside next to…