Welcome. How can we help?

Help Center Search Results

x

Try searching by "Product ID", or by asking a general question.

Wireless signal is intermittent or not working

Simply moving your display console (or receiver) to a different location may easily fix the communication issue. We recommend the following best practices for trouble free wireless communication. Fresh Batteries. If applicable, make sure there are fresh batteries in both the console and remote. Remember…

How do I test the accuracy of my rain gauge?

To determine the accuracy of a digital rain gauge, you need to know the surface area of the funnel. If the rain gauge has a rectangular inlet: Area = length x width If the rain gauge is circular: Area = ( π x d2 ) /…

My rain gauge appears to be under reporting.

If the display is showing rain rate, change to daily rain to track the rain accumulation better. Make certain the rain gauge is level. If not perfectly level, the tipping mechanism will not work properly and under report rain. Make certain there are no obstructions…

Testing the accuracy of a hygrometer - saturated salt test

The saturated salt solution test is an easy method for testing the accuracy of your humidity sensor. Most electronic sensors are accurate from +/- 3 to 5% humidity, and some weather stations or weather centers can be calibrated from the display console by applying a…

Weather Station Temperature Reads Too High in the Day Time.

Temperature reads too high (or inaccurate) when placed in the sun or close to a radiant heat source, like a house, building or structure. Place the sensor inside next to the indoor console sensor. Wait about 1 hour for stabilization. The sensors should agree within…

How can I test the accuracy of my hygrometer (humidity Calibration)?

Place the sensor inside next to the indoor console sensor. Wait about 24 hours for stabilization. The sensors should agree within the accuracy specifications. Most digital capacitive hygrometer sensors are accurate within +/- 5%. Thus, the sensors should agree within 10% when considering full tolerance…

How long will a weather station last?

A weather station’s life is greatly impacted by the environment. In general, a user can expect a 1 to 10 year life before replacing the sensor array. Salt Air. Salt air and salt spray is the most difficult environment for weather stations. They corrode bearing…

Relative barometric pressure does not match official source.

Your relative pressure likely does not match the official source because you have not calibrated it properly. You will need to reference your User Manual for correcting relative pressure. Discussion: To compare pressure conditions from one location to another, meteorologists correct pressure to sea-level conditions….

Wind Direction is Wrong.

If the wind direction is incorrect, it is likely a calibration issue. You must calibrate your wind vane to true north using markers on the wind vane. This procedure is described in your product User Manual. Some other common mistakes. Wind direction appears 180 degrees…

The sensor displays "OF" and the console displays "LL" or "HH.H"

If the sensor displays “OF” and the console displays “LL”or “HH.H”, the senor must be replaced. We have a one year warranty. For details, please visit: www.AmbientWeather.com/rma.html Out of warranty replacements are available here: F007PF:  https://www.ambientweather.com/amf007pf.html F007T: https://www.ambientweather.com/amf007t.html F007TH: https://www.ambientweather.com/amf007th.html F007TP: https://www.ambientweather.com/amf007tp.html

Temperature and / or Humidity is Drifting or Inaccurate

Replace the batteries. We recommend the following batteries: https://ambientweather.net/help/my-rechargeable-batteries-no-longer-work-which-batteries-are-recommended-for-my-weather-station/ Clean any corrosion around and on the battery terminals. If the problem persists, the sensor array must be replaced. We have a one year warranty. To replace under warranty, please visit:www.AmbientWeather.com/rma.html If out of warranty, a…

Temperature Reads too low at night.

Temperature can read too low (or inaccurate) at night when placed close to a radiant heat source, like a house, building or structure.  It can also read lower then other stations in your area due to irrigation or sprinklers. Place the sensor inside next to…

Channel 2 Does not Report to the Console.

If you own more than one sensor, make sure the first sensor is on Channel 1 and the second sensor is on Channel 2. To set the dip switches, please reference: How do I Set the Channel Number Using the Dip Switches in the Sensor?…