Welcome. How can we help?

Help Center Search Results

x

Try searching by "Product ID", or by asking a general question.

What is the difference between absolute and relative pressure?

Absolute pressure is the measured atmospheric pressure. Absolute pressure is not corrected to sea-level conditions. To compare pressure conditions from one location to another, meteorologists correct pressure to sea-level conditions (referred to as relative pressure, or pressure relative to sea-level). Because the air pressure decreases as…

How do I use Cumulus Software with EasyWeather?

Download the most recent version from the Downloads page here:https://cumuluswiki.wxforum.net/a/Main_Page Install and run the software. To communicate to this weather station, select Configuration | Station menu in Cumulus and select the Fine Offset station type option under Station Type.

Reset all alarms at once, WS-2080, WS-2090, WS-2095 Series.

A factory reset will restore the memory to default conditions. Press and Hold the UP arrow key for 30 seconds to restore the display console to factory default. The console will beep and reset after 30 seconds. Let go of the UP arrow key. Wait…

Can I calibrate sensors with the WS-2080, WS-2090, WS-2095 Series.

Some consoles allow for calibration of the following parameters: Indoor Temperature Outdoor Temperature Indoor Humidity Outdoor Humidity Wind Speed To determine of your console as calibration, refer to the User Manual here: https://p10.secure.hostingprod.com/@site.ambientweatherstore.com/ssl/Manuals/ws2080a.pdf Section 6.13.  

Outdoor or Indoor Temperature reads 140 degF or -40 degF.

If the console temperature reads 140 degF or -40 degF, a factory reset may resolve this issue. To restore to factory default settings, Press and Hold the UP arrow key for 30 seconds to restore the display console to factory default. The console will beep…

Can the Weather Station Measure Snow?

Most weather stations use self-emptying rain gauges, which do not count snow and will not operate when frozen. It requires the snow melt before the precipitation is “counted”.

Sensor does not communicate to the Display Console, WS-2080 Series.

If the WS-2080 transmitter is not communicating to the sensor array: Change the batteries to fresh alkaline or lithium batteries. The LED under the plastic will flash about once every 14 seconds. Power down and up the display console by removing the batteries and USB…

Wind Speed Reads 0.0 even when the wind cups are spinning.

If the wind speed reads 0.0 even when the cups are spinning, the sensor array will need replacing. We have a one year warranty. For details, please visit: www.AmbientWeather.com/rma.html For out of warranty replacement, visit: https://www.ambientweather.com/amws5300array.html The sensor array also works with the Model WS-2080….

How do I Reset Total Rain?

To reset the total rain, press the MENU button until the rain field flashes. Press the up key until the total rain is showing in the display field (the display alternates between 1 hour, 24 hour, week, month and total rain increments). Press the enter key four…