Welcome. How can we help?

Help Center Search Results

x

Try searching by "Product ID", or by asking a general question.

My Total Rain Keeps Resetting to Zero.

If your total rain keeps resetting to zero, ff you press and hold the RAIN button for two seconds, it will clear the total rain. Thus, you want to press but do not hold the RAIN button to view the different increments of rain.

Can I add the WS-2000 Console to my WS-2902 Series Weather Station?

Yes, you can, since they both use the same sensor array. However, the WS-2902 series includes a thermo-hygrometer-barometer sensor inside the console. The WS-2000 console (WS-2000-C) does not include this sensor, because it would heat up too much due to the TFT screen technology. With the…

How to report to Automatic Packet Reporting System (APRS) using Weatherbridge

How to report to Automatic Packet Reporting System (APRS) using Weatherbridge In the Weatherbridge Control Panel select the ‘Weather Network’ tab. Select APRS from the ‘Add more Weather Networks’ drop down list APRS Server: rotate.aprs2.net:14580 APRS ID is your Ham radio Call Sign APRS RegNum…

Barometer Reads a Very Large Number

If your barometric pressure reads a very large number, such as 1000, it means that you accidentally changed the barometer units of measure from inHg (default) to hpa or mmHg. To enter the calibrated relative pressure into the console, you must enter the SET mode. To enter…

How do I enter my WeatherCloud Station ID and Key?

How do I enter my WeatherCloud Station ID and Key? Create an account at WeatherCloud.net Add a New device Notate the WeatherCloud ID and Key Launch the AWnet App and tap on your device, as shown in the figure below. AmbientWeather.net console settings are displayed….

Humidity Changes Rapidly and Unrealistically, Osprey Series

If the humidity changes rapidly and unrealistically, with errors that exceed the accuracy specification, it is possible the sensor array requires fresh batteries or needs resetting. Cover the solar collector to shut of the solar energy source. Cover remove the batteries. Press the reset button…

How to obtain your CWOP ID using Weatherbridge

To obtain your CWOP ID using Weatherbridge: In the Weatherbridge Control Panel select the ‘Weather Network’ tab. Select CWOP from the ‘Add more Weather Networks’ drop down list In order to upload data, you need credentials from CWOP. Visit: http://www.findu.com/citizenweather/cw_form.html. Check your email for your…

Display Console is Dim.

If the display is Dim: Make sure the console is plugged into AC power and the power is switched on. If the console operates on battery power, the LED backlight is temporary when LIGHT SNOOZE button is pushed. Press the LIGHT SNOOZE button on the front of the console….

WS-2902A iphone/ipad unable to join AMBWeather-wifi

If you receive error ‘Unable to join “AMBWeather-wifixxxx”: If you receive error ‘Unable to join “AMBWeather-wifixxxx” when trying to set up the WS-2902A console with the awnet app on an ios device (iphone/ipad) please follow the steps below. Uninstall awnet app Restart iphone/ipad Resinstall awnet…

WS-2902A: Console Missing Segments

If the console is missing segments, there is no way to repair the console. We have a one year warranty. Please visit: www.AmbientWeather.com/rma.html To replace out of warranty, please visit: https://www.ambientweather.com/amws2902aconsole.html

Router Name Displays < unkown SSID >

This usually means the phone or device is not connected to WiFi. Also, make sure the router’s 2.4 GHz band is operating and plugged in. If you have repeaters or a mesh network, unplug these repeaters or secondary nodes so only the primary router is…

Peak Wind Gust Is falsely reported as 110.7 mph

If the peak wind gust is incorrectly reported as 110.7 mph and the problem repeats every day, there is an issue with the sensor array and must be replaced. We have a one year warranty. To replace under warranty, please visit: www.AmbientWeather.com/rma.html For out of…