Welcome. How can we help?

Help Center Search Results

x

Try searching by "Product ID", or by asking a general question.

Wireless signal is intermittent or not working

Simply moving your display console (or receiver) to a different location may easily fix the communication issue. We recommend the following best practices for trouble free wireless communication. Fresh Batteries. If applicable, make sure there are fresh batteries in both the console and remote. Remember…

Weather Station Temperature Reads Too High in the Day Time.

Temperature reads too high (or inaccurate) when placed in the sun or close to a radiant heat source, like a house, building or structure. Place the sensor inside next to the indoor console sensor. Wait about 1 hour for stabilization. The sensors should agree within…

How do I read indoor conditions on Weather Underground?

Weather Underground only provides indoor data in their iPad application Wunderstation. However, AmbientWeather.net fully supports indoor and multiple channel sensors. Here is a complete list of weather stations that work with AmbientWeather.net: https://www.ambientweather.com/ambientnet.html  

What is the Time Server For and Why is it Selectable?

The time server settings automatically sets the console time based on official time server sources over the Internet. The default is the time-a.nist.gov, which is the most reliable in the USA. Outside the USA, you may select a different time server if the console does…

The AC adapter is not making a good connection

If you own a volt meter, test the output of the AC adapter. If the voltage is normal, the device itself may have a connection issue and would need to be replaced. Ambient Weather has a one year warranty. To replace under warranty, please visit:…

Sensor TX-3110B Humidity Sensor Reads Lo

If the sensor reads Lo from the display, It indicates the humidity is less than the 10% measurable range. If the humidity remains Lo under all conditions, the sensor will need replacing. We have a one year warranty. Please visit: www.AmbientWeather.com/rma.html For out of warranty…

Temperature Reads too low at night.

Temperature can read too low (or inaccurate) at night when placed close to a radiant heat source, like a house, building or structure.  It can also read lower then other stations in your area due to irrigation or sprinklers. Place the sensor inside next to…

Outdoor Temperature not Updating on PWSWeather

If the outdoor temperature and humidity is not reporting on PWSWeather, but updating fine on AmbientWeather.net: Unfortunately there is no way to support this device because it is handled as an 8-channel sensor and not an outdoor sensor like with traditional stations. The issue is…